Ender 3 V2 Enclosure, Creality Fireproof and Dustproof 3D Printer Enclosure Constant Temperature Protective Cover Room for Ender3 V2/Ender5/5 Pro,CR-10/10S/10MINI,CR-X/CR-20- Middle

  • Dimensions: 29.9*25.5*28.3”(760x650x720mm). It is compatible with Ender3 V2/Ender5/5 Pro,CR-10/10S/10S PRO/10MINI,CR-X/CR-20(NOTE: Not for CR-10 MAX/ CR-10 S4/S5). Confirming your printer's size firstly.
  • Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability.
  • Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well.
  • Stable Structure: Equipped with a selection of iron pipes to support, the structure of this 3d printer enclosure is stable. Soundproof and dustproof, giving you a more comfortable printing experience.
  • Easy to Use: This Creality enclosure is foldable, easy to store and carry, saving your space. With pockets to hold the necessary tools. Access the printer by unzipping the front of the enclosure.


Related Of Ender 3 V2 Enclosure, Creality Fireproof and Dustproof 3D Printer Enclosure Constant Temperature Protective Cover Room for Ender3 V2/Ender5/5 Pro,CR-10/10S/10MINI,CR-X/CR-20- Middle

No. 1

Notrax 109 Brush Step Entrance Mat, for Home or Office, 3' X 5' Red/Black

  • A lighter-weight double rib high/low design that performs the scraping function of the mat (Note: ribs run length of mat)
  • Vinyl backing helps reduce mat movement
  • Face weight: 19 oz. per square yard
  • Backing thickness: 70 +/- 4 mils
  • Weight: 0. 77 lbs. square/feet
No. 2

Medline MSC1244EPZ Optifoam Non-Adhesive Dressings, 4" x 4" (Pack of 10)

  • Non-Adhesive
  • Multiple area of application
  • Wound Condition Type : Shallow/ Drainage
  • Dressing Change Frequency : Maximum 7 Days
  • Use : Check Drainage
No. 3

Screw Mount 24A/400V 30 Position Screw Terminal Block Distribution Module

  • Screw Mount 24A/400V 30 Position Screw Terminal Block Distribution Module.
  • Terminal Block: Pitch 5.0mm/0.197", Strip length 7mm. Screws - M3,steel,Cr3+ Zn plated. Pin header and Cage - Brass.
  • Wire range 26AWG ~ 12AWG / 2.5mm square. Rated voltage 400V, rated current 24Amp(per position).
  • Taiwan High quality fireproof nylon material mount carrier(not China low quality carrier). Also included are two M3 x 10mm wood screws, you can easily mount it on a wooden board.
  • External dimensions: L175mm x W48mm x H33.1mm / 6.89" x 1.89" x 1.30"
No. 4

Ferrule Crimping Tool Kit Wire Crimping Tools Crimper Plier Set with Oxford Bag and 1200PCS Copper Terminal Wire Terminals Crimping Connectors Self-Adjustable Ratchet Tool AWG23-7 Wire End Ferrules

  • Ferrule Crimping Range – AWG23 - 7 ( 0.25~10mm² ). Each kit comes with a ferrule crimping tools with 1200pcs wire ferrules terminals
  • Self-adjustable Ratchet Design–Automatically adjust itself to the appropriate diameter for wire ferrules terminals provide more accurate crimping
  • Ergonomic Design – The handle with pp environmental protection material , More comfortable and safe to use and using the leverage theorem, the operation more effort,provides improved gripping power
  • Smooth product surface treatment– While improving the beauty of the product, the coating on the surface can prevent rust and greatly increase the service life of the product
  • Portable Functional Kit – Ferrule crimping tool kit could help you quickly complete the wiring to support small DIY projects and large electrical repairs .Bring your own Oxford bag, easy to carry
No. 5

CaterEco Deluxe Round Palm Leaf Plates Set (50 Pack) | (25) Dinner Plates & (25) Salad Plates | Ecofriendly Disposable Dinnerware | Heavy Duty Biodegradable Party Utensils for Wedding, Camping & More

  • IMPRESSIVELY STURDY DESIGN: Unlike other palm leaf plates that easily break under hefty meals or leak when used to serve saucy dishes, the CaterEco palm leaf dinnerware set is crafted using premium leaves for an extra-sturdy result. This means you won’t have to deal with messy accidents at your party, and the heavy duty design also treats you to microwave-safe convenience.
  • 100% COMPOSTABLE & DISPOSABLE: Our ecofriendly disposable plates completely steer away from chemicals that leech into food or binders that compromise biodegradability. This palm leaf plates set biodegrades faster than others in approximately 60 days, is fully recyclable, and safely burnable, making it ideal for disposal in fire pits at summer camps or lodges.
  • CRAFTED BY HAND: Give your outdoor party a unique touch with this handcrafted palm leaf dinnerware. Crafted by experienced artisans exclusively using palm leaves that have naturally dropped to the ground, these disposable party plates spruce up any setting with their earthy look, eye-catching palm leaf patterns and a lovely blend of color.
  • ECONOMICAL VALUE PACK: Get the best bang for your buck with our 50-piece palm leaf disposable plates set. It includes (25) 10” disposable dinner plates and (25) 7” disposable salad plates. Whether you’re looking for plates to serve your guests at a wedding, porch party, luau, barbecue, or take with you on that camping trip, these palm leaf party plates blend convenience and value.
  • 100% SATISFACTION GUARANTEE: We’re happy when you’re happy. That’s why we’ve backed these palm tree leaf plates with our total satisfaction guarantee. If you have any questions or issues with your biodegradable disposable plates simply reach out to us and we’ll do all we can to make it right. Click ‘Add to Cart’ now and start dining in eco-friendly style!
No. 6

Amenvtool 20 Metal Wood Oscillating Saw Blades Kit, Multitool Quick Release Tool Blades Compatible with Bosch Dremel Master Ridgid Ryobi Milwaukee Rockwell Fein Multimaster (20 Pcs)

  • 20-piece set of multi-function saw blades for different purposes to meet your different needs.
  • The saw blade can easily cut iron, nails, wood, plywood, plastic, pipes, soft metals, etc. and is suitable for various turning tools on the market.
  • These saw blade sets include standard teeth, Japanese-style teeth, and precision-toothed saw blades, offering a variety of options. Length markers (inches and centimeters) on both sides are used for precise cutting.
  • These saw blades are made of alloy steel and high carbon steel and are therefore extremely durable. Suitable for professionals and amateurs.
  • The 20 multifunctional swing saw blades include 6 different types of saw blades, each type is used to cut different materials and can be used in the workshop, home or elsewhere.
No. 7

ANTFEES HVAC 1/4" Quick Coupler Charging Hose Refrigerant Replacement Gaskets Rubber Manifold Repair Sealing O Ring Kit

  • HVAC Gasket-For Automotive A/C HVAC 1/4" refrigerant charging hose / manifold repair, replacement kit.
  • A/C system air conditioning seal repair kit O oings seals auto repair tool
  • For all 1/4" port seal for all R410A adapter
  • Manufactured to strict tolerances to resist blow out
  • Waterproof, oil resistant, wear resistance,impact resistant, and freon resistant and corrosion resistant.
No. 8

Arm & Hammer 12-Count Sink Garbage Disposal Cleaner, Freshener & Deodorizer Capsules Citrus Scent, with Power of Baking Soda

  • ELIMINATES ODORS: Arm & Hammer garbage disposal cleaner works to deodorize your sink leaving behind a fresh citrus scent
  • BAKING SODA: with the power of Baking Soda, used to deodorize your sink and remove excess odors left from food particles
  • STEP 1 PREP: run disposal and water for one minute prior to use to clear your sink from excess food particles left behind
  • STEP 2 READY: turn off the disposal and reduce water to a slow stream to continue the flow of water down the drain
  • STEP 3 DROP: simply drop a capsule into the disposal and turn on the disposal for 15 seconds to break up the capsule and release the fresh, citrus scent
No. 9

1x2 Antique Onyx Travertine Splitface Finish Mosaic Tile, Backsplashes, Walls

  • Antique Onyx Natural Stone Splitface finish
  • Each sheet covers 1 sqf
  • Interlocking edges for easier installation
  • Textured Travertine
  • Each sheet comes on a fiber mesh
No. 10

Johnson Controls P66AAB-1C P66 Series Electronic Fan Speed Control, 190-250 psi Operating Range, 10 Start Voltage, 6" Capillary Length

  • Exclusive Johnson controls/penn pressure transducer responds quickly to condenser pressure changes and condenser air delivery requirements
  • Soft Start Capability Provides A Smooth Fan Startup, Which Reduces Motor-Starting Noise And Abrupt Changes In Motor Speed
  • 208-240/277/480 Vac, 60 Hz Motor Control Suitable For A Wide Range Of Condenser Fan Motor Applications
  • Available with single or dual inputs for single- or multi-circuited condensers—dual models control to high signal (high signal select)
  • Two effective throttling ranges (ETRs) provide either a 30 or 60 psi (207 or 414 kPa) ETR
No. 11

Concession Sink 4 Large Compartment Stand Food Trailer Truck

  • 4 Large hotel pans: dimensions in image gallery; 22 gauge 18/8 stainless steel meet NSF standards
  • Combined dimensions: 12 ⅞ x 41 ¾ x 6 ⅛ inches; width is less if pan lips overlap
  • 4 Beveled bar drains & basket strainers: faster draining; required by most health departments
  • Hot and cold water faucet; 12 inch commercial spout; adds space to sink area; reaches 3 pans
  • 6 Inch commercial spout on hot and cold water faucet; vacuum-plated chrome finish
No. 12

Brady 125529 Bilingual Sign, Legend"Please Do Not Litter/Favor De No Tirar Basura", 10" Height, 7" Width, Green on White

  • Made of B-555 aluminum material
  • Sign panels are round-cornered and punched for application to rigid surfaces
  • Excellent chemical and abrasion resistance
  • 5-8 years average expected outdoor life
No. 13

PR70 Maintenance Wipes by New Pig | Heavy-Duty Pop-Up Wipers in Dispenser Box | 9" x 16" 750 Wipers (6 Boxes of 125) | PIG Wipers | New Pig Wipes | WIP306, Blue

  • INDUSTRIAL STRENGTH PIG WIPERS FROM NEW PIG: Great for all purpose use in mechanic and machine shops, with auto body and car detailing – even at home in your garage and workshop.
  • TOUGH AND ABSORBENT: Expect to generally use a sheet at least twice – always on progressively dirtier jobs, starting with mild cleaning and finishing up with oil or grease wipe up.
  • PLACE DISPENSER BOXES AROUND YOUR SHOP and garage for easy access and remote use.
  • ALL PURPOSE WIPES ARE ENOURMOUSLY USEFUL FOR ANY TYPE OF SPILL, have very little lint and are great for cleaning floors and glass.
  • EXTREMELY TOUGH AND DURABLE, these New Pig Wipes are ideal for wiping up spills of oil, paint, thinner, and stain.
  • INDUSTRIAL STRENGTH WIPERS put ordinary paper towels to shame! They are great for using with degreasers, alcohol, mineral spirits, various other solvents and water in many different ways
  • MAINTENANCE WIPES BY NEW PIG are the quality and durability you expect from the leaders in handling leaks, drips, and spills.
No. 14

Vestil CB-2 Corner and Surface Guard, Thermoplastic Rubber, 3-15/16" Length, 3-15/16" Width, 1-1/16" Height, 1-1/16" Thick, 16 per Carton

  • Corner and surface guard/bumper will reduce damage to walls, furniture and machinery from cart, and platform truck impact
  • Thermoplastic rubber construction with steel insert provides impact absorption
  • Easily attaches to any steel, aluminum, wood, or plastic surface for a more vast variety of load surfaces
  • Lightweight corners are used to eliminate damaged goods
No. 15

NMC LOTAG15 DANGER - ELECTRICAL PANEL LOCKED OUT – THIS TAG & LOCK TO BE REMOVED ONLY BY THE PERSON SHOWN ON BACK Tag –[Pack of 10] Vinyl 2 Side Danger Tag,White

  • Facility Tag: this tag is often seen in manufacturing or industrial facilities to enforce safety. It alerts the reader about a locked out electrical panel and informs that the tag and lock should only be removed by the person shown at the back
  • Material: the OSHA lockout tag is made of unrippable vinyl with a hole on the top for connecting the tag through a lock shank, wire, string, or nylon tie wrap
  • Specification: the 2-sided rectangular unrippable vinyl tag is 3 in. wide, 6 in. high and 0.015 in. thick. The tag has white text on a red base with black text on a white base. It is available in a pack of 10 and come along with fasteners for deployment
  • Tag Legend: the front side legend reads DANGER - ELECTRICAL PANEL LOCKED OUT – THIS TAG & LOCK TO BE REMOVED ONLY BY THE PERSON SHOWN ON BACK. The back-side legend is DANGER - EQUIPMENT LOCKED OUT BY
No. 16

Eldorado Nitrile Coated Multipurpose Work Gloves with Grip. Color: Red (12 Pairs Pack, M)

  • HAND PROTECTION - The gloves protect hands while working with home projects, at construction sites, in the garden, garage/body shop, farms, warehouse, logicstics, and others. The gloves aim to protect your hands from injuries, contribute to comfort and better quality of work.
  • STRONG GRIP - The multi-purpose goves have an additional nitrile coating for extra gripping, that is particularly useful for household work and commercial use.
  • HIGH QUALITY MATERIAL - Made of elastic breathable material, the gloves are designed to protect hands from cuts, exposure to household chemicals, coloring substances, as well as high/low temperatures. They are lighweight and easy to use.
  • LONG LASTING PRODUCT - Coming in packs of 12, this set of durable-material gloves will serve buyers for an extended period of time.
  • BUY WITH CONFIDENCE - We stand behind our product and offer 100% refund if buyer's expectations are not fully met.
No. 17

Gates K080525 Micro-V Serpentine Drive Belt

  • Special belt construction eliminates belt noise, reduces tension loss and solves problem drive applications
  • EPDM rubber constructions resist cracking on the rib surface
  • Meets or exceeds all specifications from the Original Equipment Manufacturer
  • Country of origin: China
No. 18

NEULOG Photo Gate Logger Sensor, 16 bit Digital Resolution, 10000 S/sec Maximum Sample Rate

  • Photogate logger sensor for measuring velocity and/or acceleration
  • Can be used to study of impulse, collisions, conservation of energy, force, and momentum for further research
  • Internally-housed infrared transmitter and receptor for detecting passing objects
  • Required accessories. To use sensors you will need either: a USB Module (USB 200) to connect via USB cable to PC or Mac, or a Wi-Fi Module (WIFI201) and battery (BAT200) to connect to any Wi-Fi enabled device (Smart Phone, Tablet, Computer)
  • 16.0 bit digital resolution for reading range of values
No. 19

uxcell a15041500ux0269 Stainless Steel Advertisement Screws Glass Standoff 12x23mm Pack of 10

  • Net Weight: 108g; Product Name: Glass Standoff
  • Dimension: 12 x 23mm / 0.47" x 0.91" (L*W); Color: Silver Tone
  • Package Content: 10x Glass Standoff; Material: Stainless Steel
  • Thread Diameter: 8mm / 0.3"; Hole Diameter: 5mm/0.2"
  • Size: 12 x 23mm
No. 20

HICTOP Ender 3 Hotend/Extruder Assembled Kit 24V 40W Adapted for Ender 3 Ender 3 pro

  • 1.HICTOP assembled hotend kit matched Creality is a plug and play replacement for Ender 3/ Ender 3 Pro/ Ender 3S.
  • 2.Accurate printing,reduces slippage, wear and tear on the extruder, and blockage when printing large filaments such as wood chips or iron chips.
  • 3.There are 2 fans, fan covers, heat block, cooling block, nozzle, throat pipe, connector, teflon pipe, thermistor sensor, heating tube, silicone cover, etc.
  • 4.Silicone Cover is to help keep temperatures on the hotend much more stable and this will result in higher print quality and consistency.
  • 5.It compatible with Ender 3, Ender 3S, Ender 3 Pro and similar 3D printer.